Kit includes

1X 07V109235

3X 07V109151-BR

3X UV11307PB-BR

You need also 2x N90783401-BR
You may require the engine re-fit kit 3W0198115K

RH13076-KT-BR is supplied as a set of two gaskets that can be fitted to the existing spacer, which in most cases remains serviceable.
You will need 2 sets gaskets per car

The original part RH13076 is made up of a spacer with gaskets bonded to both sides.

You need to use kit CD6687-BR

Required quantity per car: 2 pcs

This kit includes; FIlter GM8684221+ Oil sump gasket GM8677009 + Washer GM116103

Kit includes

1X UV11305PA-CO-BR

3X UE42838-BR

4X UE34258-BR

The original Suction throttling valve is no longer available. Conversion kit CD6687-BR allows the original valve to be replaced

Kit includes

1X Exhaust downtake pipe & front silencer RH7629-BR

1X Exhaust rear silencer RH7042-BR

1X Exhaust tail pipe RH7571-BR

This is the main alarm ECU. It's located under the dashboard.

Front calipers needs two gallery seals per caliper.
Rear calipers have two gallery seals per caliper.

Mild steel

Includes; 1X Exhaust short down pipe RH, 1X Exhaust long down pipe, 1X Exhaust front silencer, 1X Exhaust tail pipe LWB, 1X Exhaust tail pipe

Complete Aluminium Radiator

Mild steel

Includes; 1X Exhaust down pipe front long, 1X Exhaust front down pipe short, 1X Main exhaust silencer LWB, 1X Exhaust middle silencer, 1X Exhaust tail pipe

Early front calipers (for solid brake discs) need one gallery seal per caliper.
Later front calipers (for vented brake discs) needs two gallery seals per caliper.
All rear calipers have two gallery seals per caliper.

Alternator - With built in regulator
This new alternator assembly is a direct replacement for both the 55A and 75A units.

This is a set of four outer hub cap rings for the 2 piece hub caps. The rings come with mounting clips already attached so they are straight push-on fit.

Bentley GT, Flying Spur & GTC (2004–2014)
It does not come with the Bentley plate spring used on some models (part number 3W0698313).

Bentley GT, Flying Spur & GTC (2004–2014)
It does not come with the Bentley plate spring used on some models (part number 3W0698313).

It is supplied without the drive gear; you can simply re-use the original gear from your existing unit.

To enable us to warranty this compressor it needs to supplied with the expansions valve
UD73898-BR and receiver drier UR74364-BR 

GT (2003-2010), GTC (2006-2010),
Flying Spur (2006-2012)

This is the chrome centre cap ring with the wording "BENTLEY MOTORS" It fits in the centre cap and the B badge locates in the centre of the bezzel.

When replacing the master brake cylinders or the service kits on a, there are several important points to take into account to ensure the system functions correctly and safely. (See notes)

When replacing the master brake cylinders or the service kits on a, there are several important points to take into account to ensure the system functions correctly and safely. (See notes)

 It is supplied as a cut length enough for one door.

It is supplied without the drive gear; you can simply re-use the original gear from your existing unit.

This 12V Dynator unit replaces the Lucas C48.