This is a modern rubber valve stem seal that can be fitted to all cars from 1960 onwards as a modification to the original cotton valve stem seal (UE7428-BR). 

On the Drophead models you will require 3 meter per door
and on the Fixed Head model you will require
4.5 meter per door

90cm

Tools Required; Peg spanner RH8051TL with long extension or the compact spanner RH8051-BR so you can use a pneumatic hamer. 

This kit will not fit the Corniche Drophead (From 1973 to 1980)

Included 1xGMF1225-BR o-ring

UR15145 Ball Pin
UR14673BR boot
XB1095R washer
RF7552 spring
UR12751 seat
RF8789 ball
UR13456 seat
UA354Z nut
UR14674 spring
UR14672 spring boot
UR4452 clip
XB7109 tab

1xUR12748 Ball Pin
1xUR14673BR boot
1xXB1095R washer
1xRF7552 spring
1xUR12751 seat
1xRF8789 ball
1xUR13456 seat
1xUA354Z nut
1xUR14674 spring
1xUR14672 spring boot
1xUR4452 clip
1xXB7109 tab

UR12748 Ball Pin
UR12187 boot
XB1095R washer
RF7552 spring
UR12751 seat
RF8789 ball
UR13456 seat
UA1104Z nut
UR12189 spring
UR12188 spring boot
UA10022Z Split pin
XB7109 tab

Front calipers needs two gallery seals per caliper.
Rear calipers have two gallery seals per caliper.

When replacing the fuel pump it is essential to clean the fuel tank & flush the system as part of the procedure.

This is a set of four outer hub cap rings for the 2 piece hub caps. The rings come with mounting clips already attached so they are straight push-on fit.

Kit includes; 6x Exhaust half clamp Nr. 4, 2x Exhaust steel O-ring, 2x Exhaust absorber assy Nr. 15, 1x Exhaust absorber Nr. 18, 2x Exhaust steel O-ring Nr. 3, 1x Mounting bracket, 1x Exhaust absorber+bracket Nr. 16, 1x Mounting bracket exhaust pipe, 1x Mounting bracket, 1x Half clamp (balance pipe) Nr. 20, 1x Olive sealing ring-exhaust Nr. 19, 1x Olive ring (balance pipe), 2x Half clamp (balance pipe), 1x Clamp balance pipe, 1x Olive sealing ring, 4x Exhaust clamp 54MM Nr. 17